top of page


We usually carry out full bodywork restorations to six Triumph Stags each year, should you visit, you will be sure to see one Stag resurrected from near death.

We have body jigs to turn your old friend upside down to make sure not rust can escape our attention, plasma cutters to remove corrosion with surgical precision.

Our welding is carried out to the highest standards by Kevin  who was trained by Ministry of Defence contractors.

In the past we have been asked to carry out a baremetal respray on the Triumph Stag shown opposite.  We uncovered a series of tack welds along the top edges of the rear wing, which had been overfilled and the hardtop was ploughing into the filler.

When we removed the tack welds, we discovered that the rest of the panel had been attached with.....BLACK MASTIC! (not very professional!!!)

Bodge Up.jpg

Corrosion on the Triumph Stag

More and more cars coming in for servicing and MOT work  are suffering from the corrosion as shown opposite.

The position is behind the front shock absorbers at the base of the inner wings.  This is a joining point for 4 panels and needs some very careful reconstruction surgery.

Check yours out!

Corrosion in this area, if ignored can take a real hold and will require extensive new heavy gauge steel finished off with a heavy gauge capping section.

Chassis Corrison2
Chassis Corrosion2
Chassis Corrosion1
Chassis Corrosion

Floor Pan Replacement

bottom of page